background image

UM_EV

O88_EN_v3.1

3

3

WARNINGS AND SAFETY GUIDELINES

!

•  Read this document thoroughly, follow all safety warnings and keep it for future reference.

•  The exclamation mark inside a triangle indicates that whatever repairing and component replacement 

operations must be done by qualified and authorized personnel.

•  No user serviceable parts inside.

•  Only use accessories tested and approved by IDEA and supplied by the manufacturer or an authorized dealer. 

•  Installations, rigging and suspension operations must be done by qualified personnel.

•  This is a Class I device. Do not remove Mains connector ground.

•  Only use accessories specified by IDEA, complying with maximum loads specifications and following local 

safety regulations.

•  Read the specifications and connection instructions before proceeding to connect the system and use only 

cabling supplied or recommended by IDEA. Connection of the system should be done by qualified personnel.

•  Professional sound reinforcement systems can deliver high SPL levels that may result in hearing damage. Do 

not stand close to the system while in use.

•  Loudspeaker produce magnetic field even while they are not in use or even when disconnected. Do not place 

or expose loudspeakers to any device that is sensitive to magnetic fields such as television monitors or data 
storage magnetic material.

•  Keep the equipment in the safe working temperature range [0º-45º] at all times.

•  Disconnect the equipment during lightning storms and when it is not to be used for a long time. 

•  Do not expose this device to rain or moisture.

•  Do not place any objects containing liquids, such as bottles or glasses, on the top of the unit. Do not splash 

liquids on the unit.

•  Clean with a wet cloth. Do not use solvent-based cleaners.

•  Regularly check the loudspeaker housings and accessories for visible signs of wear and tear, and replace 

them when necessary. 

•  Refer all servicing to qualified service personnel.

•  This symbol on the product indicates that this product should not be treated as household waste. Follow local 

regulation for recycling of electronic devices. 

•  IDEA declines any responsibility from misuse that may result in malfunction or damage of the equipment.

Summary of Contents for EVO88-M


















Reviews: