background image

Please read this instruction manual carefully and familiarise yourself with your new jug
kettle before using for the first time.
Please retain this manual for future reference.

IMPORTANT SAFEGUARDS:

When using your kettle, basic safety precautions should always be followed, including the
following.

1. 

Read all instructions carefully, even if you are familiar with the appliance.

2. 

Close supervision is necessary when any appliance if used by or near children.

3. 

Before connecting the kettle, check if the voltage indicated on the appliance
(underside of kettle and base unit) corresponds with the main voltage in your home. If
this is not the case, contact your dealer and do not use the kettle.

4. 

Switch off and unplug from the outlet before filling, emptying or cleaning, or when not
in use.

5. 

Do not overfill as boiling water may be ejected. The maximum level is marked on the
inside of the kettle.

6. 

Do not operate or place any part of this appliance on or near any hot surfaces (such
as gas or electric burner or in a heated oven).

7. 

Do not let the cord hang over the edge of a table or counter. Do not let the cord touch
hot surfaces.

8. 

Never yank on the cord as this may damage the cord and eventually cause a risk of
electric shock.

9. 

If the supply cord of this appliance is damaged, it must only be replaced by a repair
shop appointed by the manufacturer, because special purpose tools are required.

10. Avoid touching hot kettle surfaces - use the handle and knobs.

11. To avoid possible steam damage, turn the spout away from walls or cabinets when

operating the kettle.

12.  If operated on wood furniture, use a protective pad to prevent damage delicate

finishes.

13.  To avoid scalding, always ensure the lid is correctly positioned before operating.

14. Scalding may occur if the lid is removed whilst heating.

15. Remove and replace the lid carefully when hot.

16. Extreme caution must be used when moving the kettle containing hot water. Never lift

the kettle by its lid. Always use the body handle.

17.

Do not switch your kettle on if it is empty.

18. To protect from electrical hazard, do not immerse this kettle, power base or cord in

any liquid.

19. Use the kettle only with the supplied base unit. Do not use the base unit for other

2

HW-302 IM  11/07/02  9:54  Side 2

Summary of Contents for Electric Kettle HW-302







Reviews: