www.iddero.com
IDDERO HCx-KNX TOUCH PANELS – User Guide
13
3.5 Security
The security page shows a list of configured alarms and their states.
From the security page you can:
Enable and disable presence simulation
Enable and disable the bypass function
Acknowledge pending alarms (either individually, or all pending alarms at once)
Access the event log
See Chapter 4 for a detailed functional description of the alarm subsystem and presence simulation.
3.6 Video
Door
Phone
Incoming Calls
When an incoming call is received (that is, when a guest presses the call button in the door phone
station) the touch panel will play a ring tone through the integrated loudspeakers, and the incoming
call icon (
) will be shown in the status bar.
If the touch panel was idle, it will automatically turn on and switch to the video door phone page. If the
option “Password required to start session” has been enabled for the project (see Section 3.9, Access
Control), a valid PIN code will be required in order to enter the door phone page.
If the touch panel is in use when an incoming call is received, it will not switch to the video door phone
page automatically, in order to avoid interrupting the user’s operation. The user can then navigate to
the video door phone page manually.
