TECHNICAL OPERATIONS
August 2014
9
17. To power the antenna's LNB with the receiver:
a. Press the red “X” button to exit the Carrier Menu and press the down button
until you get to the LNB menu.
b. Press the green check mark button to enter the LNB Power Supply menu, use
the up or down arrow buttons to enable the LNB power supply.
c. Press the green check mark button to accept the change. If the signal is
present at the coaxial cable connector on the rear panel, your receiver should
lock to the DVB carrier, indicated by the green LOCK LED.
18. Connect the antenna feed to the receiver and power-up.
19. When the LOCK LED is steady on GREEN, contact Macquarie Media Syndication to
confirm authorisation and test the receiver. If the LOCK LED flashes between RED
AND GREEN or is steady on RED, check the antenna system. Authorisation will be
indicated by the CH1 and CH2 Audio LED's FLASHING GREEN.
LED Display
Lock
indicates receivers lock to incoming satellite DVB carrier on the L-Band input.
•
Off
: no power and no lock.
•
Solid Green
: unit is locked to the DVB carrier.
•
Solid Orange
: unit is locked but the signal has fallen to a level at which
uncorrected packets may appear. If rain fade is the cause, the receiver will
recover quickly without losing lock.
•
Solid Red
: the unit is not locked to the DVB carrier, this will be the case
while it’s booting, lock is not expected until the status light turns green.
