idatastart OEM-IDS(RS)-BM1-[ADS-BM1]-EN, Install Manual

Page: 17 / 18

U.S. Patent No. 8,856,780
instaLLation checKList - 1 OF 2
checKList
01 WARNING: Vehicle engine will start many times. Test in a well ventillated area.
02 Open driver door window for easy vehicle access.
03 Close all vehicle doors, hood and trunk.
04 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.
Question 1: Does the vehicle remote start?
¨
¨
YES: Go to step 5.
NO: The module doesn't detect OEM remote lock button from the vehicle communication network. Check all connection, repeat step 4 and call technical support if the problem persist.
05 Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down vehicle.
Question 2: Does the vehicle shut down?
¨
¨
YES: Go to step 6.
NO: Repeat step 5. If problem persists, push vehicle start button once [1x] to shut down the vehicle and call technical support.
06 Unlock and open driver door.
07 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.
Question 3: Does the vehicle remote start?
¨
¨
YES: The module does NOT detect the door signal from the vehicle communication network. Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down vehicle and call technical support.
NO: Go to step 8.
08 Open hood.
Question 4: Is the orange warning sticker "Sticker 1" placed under the hood?
¨
¨
YES: Leave hood open and go to step 9.
NO: Put the mandatory orange warning sticker "Sticker 1", leave hood open and go to step 9.
09 Close all doors.
10 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.
Question 5: Does the vehicle remote start?
¨
¨
YES: Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down vehicle. Go to Question 6.
NO: Go to step 11.
Question 6: Is the vehicle equipped with a factory hood switch? (Inside hood latch)
¨
¨
YES: The module does NOT detect the hood signal from the vehicle communication network. Call technical support.
NO: Install the mandatory hood switch included in the kit. Repeat installation checklist.
11 Close hood.
12 Enter vehicle. Do NOT press brake pedal.
13 Close all doors.
14 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.
15 Wait for the vehicle to start.
16 Press brake pedal.
Question 7: Does the vehicle shut down?
¨
¨
YES: Go to step 17.
NO: The module does NOT detect the brake pedal signal from the vehicle communication network. Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down vehicle and call technical
support.
17 Apply parking brake.
18 Exit vehicle.
www.idatastart.com Automotive Data Solutions Inc. © 2014 OEM-IDS(RS)-BM1-[ADS-BM1]-EN
Page 17 oF 18
• 20141212
DOC.: #18934