Patent No. US 8,856,780 CA 2759622
INSTALLATION MODE SELECTION
1
Press and release
programming button
to select installation mode.
2
Press and hold
programming button
until LED turns solid GREEN
to register selection.
!
After registration, follow Factory Reset Procedure to
change installation mode and restart this procedure.
LED fl ashes (1X) once = DATA MODE
LED fl ashes (2X) twice = STANDARD HARDWIRE MODE
MODULE PROGRAMMING PROCEDURE - PUSH TO START
8
Module Programming
Procedure completed.
6
Wait, LED will turn solid GREEN
for
2 seconds
.
!
Place all other keyfobs at least 1 foot away from the
Weblink HUB. Failure to comply may result in damage
to other keyfobs or interfere with the keyfob reading
process.
3
Flash the module using the
Weblink HUB. Follow the on
screen instructions to complete
the keyfob reading process.
2
Remove OEM key 1 from
keychain.
1
For this installation, the Weblink
HUB is required.
4
WARNING:
Do not press the module
programming button.
Connect power fi rst.
Connect module to vehicle.
Æ
5
Using OEM key 1, turn key to ON
position.
ON
7
Turn key to OFF position.
OFF
Page 11 of 12
ADS-AL(AL)-SUB9-EN
20221206
INSTALL GUIDE
WWW.IDATALINK.COM
Automotive Data Solutions Inc. © 2022
ALL IN ONE
Subaru
Doc. No.: ##80972##
