U.S. Patent No. 8,856,780
XX-XX
PAGE X-X
XX-XX
PAGE X-X
ADS-AL(DL)-CH5
PAGE X-X
TYPE 1-4 & 6-8 - MODULE PROGRAMMING PROCEDURE
9
Module Programming
Procedure completed.
5
Turn key to OFF position.
OFF
1
Insert key into ignition.
2
Turn key to ON position.
ON
7
Press UNLOCK on the OEM
remote.
If vehicle is not equipped with
OEM remote, press module
programming button.
UNLOCK
4
Within
5 seconds
, LED will fl ash
GREEN rapidly.
3
LED will turn solid RED.
8
Wait, LED will turn solid GREEN
for
2 seconds
.
6
Remove key.
TYPE 5 - MODULE PROGRAMMING PROCEDURE
6
Module Programming
Procedure completed.
4
Turn key to OFF position.
OFF
1
Insert key into ignition.
2
Turn key to ON position.
ON
3
Wait, LED will turn solid GREEN
for
2 seconds
.
5
Remove key.
ADS-AL(DL)-CH5
91
INSTALLATION MODE SELECTION
1
Press and release
programming button
to select installation mode.
2
Press and hold
programming button
until LED turns solid GREEN
to register selection.
!
After registration, follow Factory Reset Procedure to
change installation mode and restart this procedure.
LED fl ashes (1X) once = DATA MODE
LED fl ashes (2X) twice = STANDARD HARDWIRE MODE
Page 18 of 19
DBI-AL(DL)-CH5-EN
20170421
INSTALL GUIDE
ALL IN ONE
Chrysler/DoDge/Jeep
WWW.IDATALINK.COM
Automotive Data Solutions Inc. © 2017
Doc. No.: ##38337##
