U.S. Patent No. 8,856,780
INSTALLATION MODE SELECTION
1
Press and release
programming button
to select installation mode.
2
Press and hold
programming button
until LED turns solid GREEN
to register selection.
!
After registration, follow Factory Reset Procedure to
change installation mode and restart this procedure.
LED fl ashes (1X) once = DATA MODE
LED fl ashes (2X) twice = STANDARD HARDWIRE MODE
MODULE PROGRAMMING PROCEDURE - WITH KLON
1
Insert key into ignition.
2
Turn key to ON position.
ON
4
Turn key to OFF position.
OFF
5
Disconnect all connectors
from module except the black
4-PIN standard or optional data
connector.
6
Disconnect the black 4-PIN
standard or optional data
connector.
11
Insert key into ignition.
12
Turn key to ON position.
ON
14
Turn key to OFF position.
OFF
13
Wait, LED will turn solid GREEN
for 2 seconds.
15
Module Programming
Procedure completed.
7
Remove module from vehicle.
Æ
8
Connect module to computer.
Æ
9
Proceed with extended
programming.
10
Connect module to vehicle.
Æ
3
Wait, LED will fl ash GREEN
rapidly.
Page 5 of 6
ADS-TB-HA6-EN
20151228
INSTALL GUIDE
Automotive Data Solutions Inc. © 2015
Transponder Bypass
Honda
Doc. No.: ##25522##
