U.S. Patent No. 8,856,780
MODULE PROGRAMMING PROCEDURE
7
Module Programming
Procedure completed.
6
Turn key to OFF position.
OFF
2
Insert key into ignition.
3
Turn key to ON position.
ON
INSTALLATION MODE SELECTION
1
Press and release
programming button
to select installation mode.
2
Press and hold
programming button
until LED turns solid GREEN
to register selection.
!
After registration, follow Factory Reset Procedure to
change installation mode and restart this procedure.
LED fl ashes (1X) once = DATA MODE
LED fl ashes (2X) twice = STANDARD HARDWIRE MODE
5
Wait, LED will turn solid GREEN
for
2 seconds
.
4
LED will turn solid RED.
1
Use the BLACK key only.
DO NOT use the GRAY valet key.
G
G
Page 29 of 30
ADS-AL(DL)-TL9-EN
20161128
INSTALL GUIDE
WWW.IDATALINK.COM
Automotive Data Solutions Inc. © 2016
ALL IN ONE
ToyoTa
Doc. No.: ##32052##
