U.S. Patent No. 8,856,780
inStaLLatiOn mOde SeLeCtiOn
1
Press and release
programming button
to select installation mode.
2
Press and hold
programming button
until LED turns solid GREEN
to register selection.
!
After registration, follow Factory Reset Procedure to
change installation mode and restart this procedure.
LED fl ashes (1X) once = DATA MODE
LED fl ashes (2X) twice = STANDARD HARDWIRE MODE
5
Module Programming
Procedure completed.
4
Turn key to OFF position.
OFF
1
Insert key into ignition.
2
Turn key to START position.
(Engine running)
START
3
Wait, LED will turn solid GREEN
for 2 seconds.
mOdULe PrOgramming PrOCedUre
Page 5 of 6
ADS-AL(TB)-MA-EN
20150928
inStall GUide
www.idatalink.com
automotive data Solutions inc. © 2015
Transponder Bypass
Mazda Miata/MPV
Doc. No.: ##22948##
