![background image](http://html1.mh-extra.com/html/idatalink/ads-al-hk2-en/ads-al-hk2-en_install-manual_615994049.webp)
ADS-AL(DL)-HK2
PAGE X-X
modULe Programming ProCedUre
4
Module Programming
Procedure completed.
3
Wait, LED will turn solid GREEN
then will turn OFF.
(If LED does not turn GREEN
after 10 seconds, remove key
fob from key port and reinsert it)
NOTE
I
WARNING: All vehicle doors must be closed and locked prior
to remote start sequence.
II
When programming, only one key fob will be used. The other
one must be located at least 10 feet away from the vehicle.
2
Insert key fob in key port.
1
Press UNLOCK on key fob.
ADS-AL(DL)-HK2
79
inStaLLation mode SeLeCtion
1
Press and release
programming button
to select installation mode.
2
Press and hold
programming button
until LED turns solid GREEN
to register selection.
!
After registration, follow Factory Reset Procedure to
change installation mode and restart this procedure.
LED fl ashes (1X) once = DATA MODE
LED fl ashes (2X) twice = STANDARD HARDWIRE MODE
Page 49 of 51
ADS-AL(DL)-HK2-EN
20130913
install guide
guides Français disponibles au www.idatalink.com
www.idatalink.com/support
automotive data solutions inc. © 2013
Doorlock Interface
Hyundai/Kia
Doc. No.: ##12069##