U s e r M a n u a l
HDMI KVM EXTENDER over Network Cable
Specifications
HDMI 1.3
Audio support
Items
Power supply
black
HDMI resolution
supported
Video bandwidth
640*480@60Hz 800*600@60Hz 1024*768@60Hz
1280*720@60Hz 1360*768@60Hz 1440*900@60Hz
1400*1050@60Hz 1680*1050@60Hz 1920*1080@60Hz
5V/1A*2pcs
109.6(L)x89.5(w)x26.3(H)mm*2pcs
PCM (44.1KHz, 48KHz)
HDCP version
HDCP1.2
≤70Mbps
HDM version
Type A ,19 pin, Female
LAN connector
Operation temperaure
0℃
〜
50℃
Relative humidity
10-95%
(
Noncondensing
)
TX:160g
RX:170g
RJ-45
Q
：
Abnormal color display or flashing after all the devices are well
connected?
A
：
1): Pls press reset button of HDMI extender.
2): Make sure the network cable is made according to the
standard of IEEE-568B.
Q
：
USB does not work
？
A
：
Re-install the driving software
，
check and make sure the USB cables
are connected well, then reset Transmitter or Receiver.
HDMI connector
Power Consumption
Dimensions
Color
Weight
Disclaimer
5.Switch Connection
PC
NOTE
：
Transmission distance depends on type of network cable,
CAT5:80m
，
CAT5E
：
100m
，
CAT6:120m.
FAQ
Q
：
Yellow light of Lan port is flashing but slowly?
A : 1) : Check whether HDMI Extender Transmitter and HDMI Extender
Receiver is reversed.
2): Check whether HDMI source device output HDMI signal correctly.
3): Change the HDMI cable of Transmitter.
Q: Yellow light of Lan port is flashing quickly but no display?
A: 1): If HDMI source is graphics card, please set the resolution to be
supported by display .
2) : Check whether HDMI cable of Receiver is well connected.
3): Change the HDMI cable of Receiver.
Q: Yellow Led light of Lan port is not light?
A: 1): Check connection of network cable.
2): Network cable is too long.
The product name and brand name may be registered trademark of
related manufacturers.TM and ® may be omitted on the user manual.
The pictures on the user manual are just for reference,and there may
be some slight difference with the real products.
We reserve the rights to make changes without further notice to a
product or system described herein to improve reliability, function
or design.
HDMI
USB
cable
Transmitter TX
Switch
Switch*N
TV
Receiver RX
NOTE
：
Point to multi-point connection via switch is supported too,but under point to
multi-point configuration, it is strongly recommended to operate KVM function on
one receiver only at the same time.
Specification
keyboard
/
mouse
TX<3.5w
RX<3.5w
