iDance XD300, Instruction Manual

Page: 13 / 13

12
TROUBESHOOTING
If you have followed the instructions and are having difficulty operating the unit, locate
the PROBLEM in the left column below. Check the corresponding POSSIBLE CAUSE
AND SOLUTION column to locate and fix the problem.
SPECIFICATIONS
Specifications are typical, individual units might vary. They are subject to continuous
improvement without notice and without incurring any obligation.
PROBLEM POSSIBLE CAUSE AND SOLUTION
Noise on speaker output
whenmicrophone is
connected and turn on
XD300
Make sure your microphone or microphone cable is in
good condition, grounded and shielded. Internal gain of
voice processing could cause vibration from poor
ground noise.
Bluetooth cannot connect
to
XD300
„
Make sure no other device from your friend or family
is connected to XD300 . When XD300 Bluetooth is
connected, press BLUETOOTH button would stay
ON. So make sure
XD300 indicating Bluetooth is
ready to connect. Also make sure your smartphone /
tablet is located close to
XD300 less than 2 meters
when pairing.
„
Hold the BLUETOOTH button to reconnect again.
Intermittent Bluetooth
music streaming
The wireless Bluetooth distance of XD300 is about 7-l0
meter in open area. Below conditions could block you
Bluetooth signal and please ensure you would get rid of
those:
„
Metal protection on case for your phone/tablet
„
Metal or wall is blocking in between your
phone/tablet and
XD300
„
Another Bluetooth device is working close to XD300
Nosound on selected
source
„
Ensure that the XD300 is powered ON
„
Check the master volume on the XD300
„
Check the volume level on paired Bluetooth device
„
Remove the power adapter/ connection cable and
reconnect again.
AC ADAPTER
AC Input :AC~ 100-240V 50/60Hz
DC Output =
15V , 3000mA
SOUND SOURCE INPUT Bluetooth, 1/4 ” Microphone, Audio out, Aux in
Total Harmonic Distortion Below 10% at Standard Output
Signal to Noise Ratio Over 41dB
Speaker Size 6.5”Full range 1.5 ”Tweeter
Speaker Power Output 20W X2 RMS Power Output