iDance XD3, Instruction Manual

Page: 11 / 15

Play / Pause
- In MP3 mode, press to Play/Pause the music
- In Tuner mode, press for auto scanning
Mode
Press to change between Tuner and Mp3 mode.
Standby Button
Press to turn ON the XD3 or put the XD3 into standby mode.
When XD3 is not in use, please put XD3 into standby mode to save energy.
Stand By Indicator
The indicator light off - power on . The indicator light on - standby mode.
Phones volume knob
Turn this knob to adjust the CUE headphone output volume.
Voice Changer
Change your microphone voice into beast (Low) or kid (Hi) by turning this knob to Hi or Low.
Please switch back to Normal for normal microphone voice
Mic volume knob
Turn this knob to turn the microphone volume
Intelligent Cross Fader
Mix your music between MP3/Tuner and Bluetooth music.
Turn the cross fader to the left for MP3/Tuner, the speakers will put out MP3/Tuner audio
while the CUE headphone will be on Bluetooth.
Turn the cross fader to the right for Bluetooth, the speakers will put out Bluetooth audio
while CUE headphone will be on MP3/Tuner.
Next / Previous
- In MP3 mode, press to select next or previous track.
- In Tuner mode, press to select next or previous preset FM channel.
Master volume knob
Turn to adjust the Master output volume.
(for speaker and master output RCA)
Record
Press to record your master mix into a connected USB drive in .wav format.
Note: During USB recording, USB playback is disabled and would automatically switch to
Tuner mode
Jingle Pitch
Turn to adjust the tempo and pitch for the jingles in real time.
Turn clockwise for pitch-up and faster tempo, and turn counter clockwise for pitch-down and
slower tempo. Turn the knob back to the middle position to return to the original pitch and
tempo.
Jingle volume pot
Turn to adjust Jingle mix volume
Equalizer
Press this button to cycle through 8 different preset EQs on Master output for your favorite.
14.
15.
16 .
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
CONTROL LOCATION (2.2)
E4