manualshive.com logo in svg

IDA TRAKIT USA, Instruction Manual

Share
Download
IDA TRAKIT USA Instruction Manual Download Page 6

 

6

 

 
Or, you can select one of the zoom speed buttons in the row directly under the menu bar 

 

 
Left-click on the magnifying glass buttons to zoom in (+) or zoom out (-) and then place 
the cursor at some position on the map.  The map will zoom and at the same time center 
on the position where you put your cursor.  The next two buttons do not require placing 
the cursor on the map.  The screen will stay in position and just zoom.  Left-click on the 
last button and you will zoom in to the smallest level.  Left-clicking this button again and 
you return to the level you came from. 
 

Landmarks 

Landmarks are icons you can place anywhere on the map to use as reference points or to 
provide you with additional information about a certain point on the map.  There are 
numerous icons to choose from and you can manage them to represent anything that 
serves your purpose.   
 

 

 
Select LANDMARKS from the menu bar.  This will bring up a menu for creating and 
maintaining the landmarks.  When you select ADD A LANDMARK SYMBOL you will 
go to the LANDMARK SYMBOL box 
  

Summary of Contents for TRAKIT USA





































Reviews:

No comments

Brands by name

Popular brands

Load more brands