9
Camera
Monitor
Camera
Camera
Camera
SD Card
RS-232
ALARM
DC12V
RS-485
hi-z
75
AUDIO
IN
IN
OUT
OUT
MONITOR
ETHERNET
I/O
SD Card
RS-232
ALARM
DC12V
RS-485
hi-z
75
AUDIO
IN
IN
OUT
OUT
MONITOR
ETHERNET
I/O
1
2
3
4
5
6
7
8
9
Alarm Reset
(Normally Open)
(Normally Open)
Alarm1 in
(Normally Open)
Alarm2 in
(Normally Open)
Alarm3 in
(Normally Open)
Alarm4 in
Ground
Trigger Out
2. INSTALLATION
Please follow the instruction and the diagram below
to set up the system.
2.1 Basic Connection
A
. CONNECTING WITH 1 to 4 CAMERAS
B
. ATTACHING AN EXTERNAL DEVICE TO DVR
Connect an alarm out, alarm input, and a
peripheral device as shown in the diagram
below.
2.2 Hard-disk Drive Installation
The DVR is equipped with two compartments
of hard disk drive
(for removable model
only).
The unit usually comes with one
hard-disk drive installed in the compartment
of HD1, which is default- configured as a
master. If you need a second hard-disk drive
to be installed in the compartment of HD2
(Mobile), please contact your distributors or
installers for specific instructions on how to
install it. Please don’t serve yourself before
consulting your installers. If there is only one
hard-disk drive in the mobile compartment,
please set the
HD2 USAGE
option to
REC
(please refer to section
4.5
) before
proceeding with the recording function. Serial
ATA (SATA) interface disk drives are designed
for easy installation. It is not necessary to set
any jumpers, terminators, or other settings on
this drive for proper operation. The
compatible hard-disk drives (Table 3.2), which
can be used with the unit, are shown in the
tables below.
Note: The
CD-RW model
is equipped with a
fixed hard- disk and a CD-RW drive. The unit
usually comes with one hard-disk drive
installed in the compartment of HD1, which is
default-configured as a master.
2. INSTALLATION
Summary of Contents for IV-400TX-SN
Page 2: ......