ID Technology 252, Operator / Technical Manual

Page: 131 / 164

Model 252
Label Printer/Applicator
Operators/Technical Manual
15
Figure 10: Internal Connectors
Inputs 4 pin connector
FUNCTION
J4 Accessory Pin 1: +24V Pin 2 & 3: Signal (NPN) Pin 4: 0V
J5 Tamp Home Pin 1: +24V Pin 2 & 3: Signal (NPN) Pin 4: 0V
J6 Smart Sensor Pin 1: +24V Pin 2 & 3: Signal (NPN) Pin 4: 0V
J12 Reserved
Pin 1: +24V Pin 2 & 3: Signal (NPN) Pin 4: 0V
J17 Low Label Pin 1: +24V Pin 2 & 3: Signal (NPN) Pin 4: 0V
J22 Reserved Pin 1: +24V Pin 2 & 3: Signal (NPN) Pin 4: 0V
J23 Reserved Pin 1: +24V Pin 2 & 3: Signal (NPN) Pin 4: 0V
Inputs 3 pin connector
FUNCTION
J1 Pressure 1 Pin 1: +5V Pin 2: Signal Pin 3: 0V
J2 Pressure 2
Pin 1: +5V Pin 2: Signal Pin 3: 0V
J3 Pressure 3 Pin 1: +5V Pin 2: Signal Pin 3: 0V
J32 Reserved Pin 1: +5V Pin 2: Signal Pin 3: 0V
J33 Reserved
Pin 1: +5V Pin 2: Signal Pin 3: 0V
J34 Reserved Pin 1: +5V Pin 2: Signal Pin 3: 0V
The internal connectors and signals are designed to work with ID Technology standard
accessories. Use of non-approved components may give unexpected results, may lead to
equipment damage and may void warranty.