ViVOpay VP5300M User Manual
Page | 14
6.
VP5300M Installation
This section provides information on how to install the ViVOpay VP5300M in an enclosure.
Note that the unit may be installed edgewise (vertically), or in a horizontal manner. It can also be
bolted to or custom-mounted flush with a surface. In the latter case, be sure to allow a 3mm
(minimum) cutout clearance around the edge of the metal face flange (assuming the enclosure is
metallic), to maintain good NFC performance.
Do not tightly flush-mount the unit to a metal
enclosure
. Test NFC performance thoroughly to be sure no interference or signal attenuation occurs.
6.1.
Parts List
Verify that you have the following hardware for the installation of the ViVOpay VP5300M:
•
IDM-101: VP5300M; Ethernet, No SAM, JIS; No conformal coating; Production Unit; No
custom features.
•
(Optional) ViVOpay 5300M NFC Antenna P/N ID-80152002-003. You will need this item and
its cable (P/N 80152235-001 or 80152336-001) to use VP5300M’s contactless (NFC)
capabilities.
•
USB cable P/N 80171201-001, or RS-232 cable P/N 80171203-001.
•
Power supply P/N
AC0005R-12
with cable 80171204-001.
6.2.
Installing the Reader
Refer to the
VP5300M 3-view drawing
. Verify that power cords can physically reach the unit. Then
proceed to:
•
Locate, mark, and drill holes for the mounting points of the unit.
•
Secure the unit to the enclosure with bolts or screws of appropriate depth. Note that the anti-
tamper nubs, located on the unit's left side, must be depressed when the unit is mounted.
6.3.
Mounting the ViVOpay VP5300M External NFC Antenna
Refer to the
VP5300M Antenna 3-view drawing
. If you are using the VP5300M’s contactless
capability, you will need to install the optional NFC antenna and its cabling.
Use the following instructions to mount the antenna on the exterior of a kiosk.
Note:
It is recommended that you experiment with and verify the orientation of the ViVOpay
VP5300M NFC Antenna before marking and drilling mounting holes, ensuring that the antenna is far
enough away from the main body of the VP5300M so that insertion of a "tap card" in the unit's
contact-EMV slot doesn't trigger an unwanted NFC interaction.
Important:
Mark holes in such a way as to ensure that the ViVOpay VP5300M NFC Antenna is
oriented with the LEDs at the top.
