√
IMPORTANT SAFETY INSTRUCTIONS
When using your telephone equipment, basis safety precautions should always be
followed to reduce the risk of life electric shock, and injury to persons, including the
following.
1.
Read and understand all instructions.
2.
Follow all warnings and instructions marked on the product.
3.
Unplug this product from the outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.
Use a damp cloth for cleaning.
4.
Do not use this product near water, for example, near a bathtub, washbowl, kitchen sink, or
Laundry tub in a wet Basement or near a swimming pool.
5.
Do not place this product on an unstable cart, stand, or table. The product may fall, causing
serious damage to the product.
6.
Slots and openings in the cabinet and the back or bottom are provide for ventilation, to protect it
from overheating. These openings should never be blocked or covered. The opening should never
should never be placed near or over a radiator or heat register. This product should not be placed
in a built in installation unless proper ventilation is provided.
7.
This product should be operated only from the type of power source indicated on the marking label.
If you are not sure of the type of power supply to your home, consult your dealer or local power
company.
8.
Do not allow anything to rest on the power cord. Do not locate this product where the cord will be
abused by persons walking on it.
9.
Do not overload wall outlets and extension cords as this can result in the risk of fire or electric
shock.
10.
Never push objects of any kind into this product through cabinet slots as they may touch
dangerous voltage points or short out parts that could result in a of fire or electric shock. Never
spill liquid of any kind on the product.
11.
To reduce the risk of electric shock, do not disassemble this product, but take it to a qualified
service contractor when some service or removing covers may expose you to dangerous voltages or
other risks. Incorrect reassembly can cause electric shock when the appliance is subsequently
used.
12.
Unplug this product from the wall outlet and refer servicing to qualified service personnel under
the following conditions:
A.
When the power supply cord or plug is damaged or frayed.
B.
If liquid has been spilled into the product.
C.
If the product has been exposed to rain or water.
D.
If the product does not operate normally by following the operating instruction. Adjust only
those control that are covered by the operating instructions. Improper adjustments of other
