ID-AL Event Video Player EVP380 – Quick Start Guide V1.0
5.6 Further Configurations
Various aspects of the playback and of the usage scenario can be configured in the menu ( ), under
Playback
engine settings
and
Scenario settings
, respectively. Contrary to all the other settings, the scenario
settings are linked to the specific use case programmed on the storage device. That’s why they are saved by the
player in
SYSTEM\scenario-config.json
on the current storage device in order to make them easily portable
to other players.
6 Show Control Subsystem
The show control subsystem of the player can receive packets from the DMX512 input and two Art -Net universes.
These packets can:
•
control the playback, the volume, and the output contacts, and send serial frames, according to the
specified DMX512 mapping (see the quick reference handbook or the user guide),
•
be forwarded to the DMX512 output,
•
be recorded in
.sc3
files using various recording start and stop conditions, including a configurable
recording control channel with a threshold.
The packets contained in the
.sc3
files (see 5.3
•
control the output contacts and send serial frames,
•
be forwarded to the DMX512 output.
Besides the regular playback and recording modes, the show control subsystem offers a monitoring mode that can
be used in a preparatory stage to try out the DMX512 or Art-Net sources without changing the production settings.
The show control modes can be enabled and configured from the menu ( ), under
Show control
.
7 Further Steps
Go to the support page of the EVP380 on www.id-al.com for the advanced features, further information,
documentation, firmware, software, and examples.
© 2019, Waves System – 7 impasse de La Ville en Bois, 44830 Bouaye, France – Phone: +33 2 40 78 22 44 – [email protected]
