27
Dual-Bay RAID Storage Enclosure
for two 3.5-inch Serial ATA
Hard Drives
IB-RD3252
http://www.icybox.de
3.4.3
Alarm Setup
The general alarm sound is the short beep you hear when starting up the system and it will also sound
when something is wrong. To enable or disable the alarm, select ON or OFF respectively.
•
[ON] Beeper and alarm is enabled.
•
[OFF] Beeper and alarm is disabled.
Press the [OK] button to enter the setup menu and press the [Select] button to cycle through the
GLϑHUHQWRSWLRQV
•
To exit the menu without changing any of the settings, press the [Select] button until you see the
Exit screen and then press the [OK] button.
•
To change the setting, press the [Select] button to choose your preferred mode and then press the
>2.@EXWWRQWRFRQ¿UPWKHFKDQJH
IB-RD3252 Display:
3.4.4
TEMP Alarm Setup
This is the alarm sound you hear when the temperature that is measured by the thermal probe reaches a
FULWLFDOOHYHO!Û&<RXFDQHQDEOHRUGLVDEOHLWKHUH
•
[Enabled] High temperature alarm is turned on.
>'LLJKWHPSHUDWXUHDODUPLVWXUQHGRϑ
Press the [OK] button to enter the setup menu and press the [Select] button to cycle through the
GLϑHUHQWRSWLRQV
•
To exit the menu without changing any of the settings, press the [Select] button until you see the
Exit screen and then press the [OK] button.
•
To change the setting, press the [Select] button to choose your preferred mode and then press the
>2.@EXWWRQWRFRQ¿UPWKHFKDQJH
Summary of Contents for IB-RD3252
Page 2: ...2 ...
