Manual IB-LAN300-PCI
Packing content:
1x IB-LAN300-PCI, 1x Additional low-profile bracket, 1x Manual
Key features:
•
Expands your desktop PC by one more RJ45 2.5 Gigabit Ethernet port
•
Supports data transfer rates of up to 2.5 Gbit/s
•
PCI-Express base specification revision 2.1 x1, fits into PCIe x1, x4, x8, x16 slot
•
Supports IEEE 802.3bz (2.5GBASE-T), data transfer rates of up to 300 MB/s via LAN
•
Compatible with IEEE 802.3, 802.3u and 802.3ab (10BASE-T, 100BASE-TX, and
1000BASE-T)
•
Two LED indicators show link and activity; supports Wake-on-LAN (WoL)
•
Supports Windows®, Linux®
System requirements:
• Windows ®, Linux®
• One available x1, x4, x8 or x16 PCI-Express slot. (PCI-Express Gen. 2.1 x1 lanes at least)
Note
:
The IB-LAN300-PCI adopts the PCIe Gen 2.1 x1 interface connector design. In order to get the full 2.5
Gigabit performance, please use at least a PCIe slot based on PCI-Express Generation 2.1 x1 lanes
for card installation.
However, some PC systems do not support PCIe Gen 2.1 specification, so that IB-LAN300-PCI cannot
support full-power performances (2.5 Gbit/s). Please double-check your PC system for system detail
information or accept a lower data transfer rate.
Installation
:
Important: To avoid damage or malfunction, remove all live cables from the computer before installing
the PCIe card. When installing the PCIe card, be aware of possible electrostatic discharge as this may
cause damage or malfunction. Touch a “grounded” metal object or wear anti-static gloves before
installation.
Attention
!
- The PCB is a very sensitive component. Please insert the PCIe card carefully and make sure it is
aligned correctly.
- To avoid cuts to your hands, proceed carefully as there are sharp edges inside the unit.
