Important Information!
If you need a power supply unit for supplying additional voltage
to the IB-DK402, please consider the following requirements for it:
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI
logo are trademarks or registered trademarks of HDMI Licensing LLC in the
United States and other countries.
© Copyright 2014 by RaidSonic Technology GmbH. All Rights Reserved
The information contained in this manual is believed to be accurate and reliable. RaidSonic Technology GmbH
assumes no responsibility for any errors contained in this manual. RaidSonic Technology GmbH reserves the right
to make changes in the specifications and/or design of the above mentioned product without prior notice. The
diagrams contained in this manual may also not fully represent the product that you are using and are there for
illustration purposes only. RaidSonic Technology GmbH assumes no responsibility for any differences between the
product mentioned in this manual and the product you may have. All the information contained in this manual was
correct at the time of publication. However, as our engineers are always updating and improving the product, your
device’s software may have a slightly different appearance or modified functionality than presented in this manual.
1.
2.
3. AC:
220 - 240 V
4. DC:
5 V, 2.5 A (at least)
PIN length:
~7.5 mm
Outside diameter:
4.0 mm
Inside diameter:
1.3 mm
