Manual IB-1819M-C31
Usage
• Connect the IB-1819M-C31 via the integrated cable to the corresponding
port of your host computer.
• When the IB-1819M-C31 has been plugged in correctly the LED will light
up blue!
Application
• The external SSD can be connected to or disconnected from the computer
without shutting down the computer.
• Please await the end of read/write operations before disconnecting the
SSD to avoid data loss.
• A new SSD must first be initialized, partitioned and formatted by the
operation system to be displayed by the system.
• If the drive isn’t recognized instantly by the operating system please check:
• if the driver software is installed (USB),
• if the SSD is initialized, partitioned and formatted.
EN Info
Drives must be initialized and have active partitions to be immediately recog-
nized as volumes in the operating system. If this is not the case, initialize the
drives in the volume management of your operating system.
The full USB 3.1 (Gen 2) transfer rate can only be achieved with a compatible
USB 3.1 (Gen 2) host computer. Furthermore, the USB 3.1 drivers must be
installed by the operating system. If this is not the case, install the appropriate
drivers for your operating system (Windows
®
, macOS
®
).
For more information, please visit www.icybox.de.
