ICWUSA.com, Inc.
If you have any questions, please call 1-800-558-4435
MD ARM INSTALLATION INSTRUCTIONS
MD ARM INSTALLATION INSTRUCTIONS - rev 11/13/2012 mf
page 3
ATTACH PARALINK KEYBOARD TRAY
Loosen knob to adjust Paralink.
Adjust horizontally for keyboard tray
and vertically for monitor. Tighten
knobs when in desired position.
Attach the keyboard tray
to the Keyboard Mount
using the supplied 5/16-
18 socket head screw.
ATTACH KEYBOARD TO MONITOR
Attach the Paralink
Keyboard Mount to
the Monitor Mount
by using the 3/8-16
screw and lock washer
provided
ATTACH FLIPUP TO PLATE
Attach the tray
fl ip-up assembly
to the fl ip-up plate
using the provided
fl at head screws
and hex key.
IF USING PARALINK KEYBOARD TRAY
IF USING ULTRA KEYBOARD TRAY
ADJUST MD ARM RESISTANCE
Using the 3/16”
t - h a n d l e h e x
wrench provided,
turn the screw in the
MD arm clockwise
to lighten the arm’s
load resistance, or
counter-clockwise
to increase the load
resistance.
ATTACH COVERS TO MD ARM
After lowering the arm to the
down position, slide on the
lower cover. Using a Phillips
head
screwdriver
(NOT
POWER TOOLS), reattach the
four screws attaching the lower
cover.
Attach the top cover by
reattaching the four top cover
screws using a Phillips head
screwdriver (NOT POWER
TOOLS).
WARNING - PINCH POINT:
Keep fi ngers away from the
inner arm area where the gas
spring is located.
