10
PRX-VARIO
Vario Proximity Card Reader
Installation Manual | November 2012
5.6
Address 3 - LED Control
The LED Control Configuration settings allow the LED lines to operate in either multiple LED or single LED
control.
Setting
Function
1
Dual LED Input. Red LED control line controls Red LED. Green LED control
line controls Green LED.
2
Red LED Always On. Red LED control line will turn Red LED off and Green LED
on.
3
Green LED Always On. Red LED control line will turn Green LED off and Red LED
on.
5.7
Address 4 - Intelligent Tamper
Enabling the intelligent reader tamper mode will force the Vario Proximity Card reader to check in to the device it
is connected to every 30 seconds.
Setting
Function
1
Disabled
2
Enabled
i
Only enable Intelligent Reader Tamper Mode if the access control system or reader interface supports
intelligent tamper operation.
5.8
Address 5 - External Button
External button input allows the second LED input to be used as a multiple function input for Area Arming,
Request to Exit and Request to Enter buttons.
Enabling the external button input mode requires the Vario Proximity Card to be configured in Single LED Mode
operation.
Setting
Function
1
Disabled
2
Enabled
