Technical Specifications
The following specifications are important and vital to the correct operation of this product. Failure to adhere to
the specifications will result in any warranty or guarantee that was provided becoming null and void.
Ordering Information
PRT-ISO16-DIN
Protege DIN Rail 16 Input Opto-Isolated Expander
Power Supply
DC Input Voltage
11-14V DC
DC Output Voltage (DC IN
Pass-Through)
10.45-13.85VDC 0.7A (Typical) Electronic Shutdown at 1.1A
Operating Current
80mA (Typical)
Low Voltage Cutout
8.7VDC
Low Voltage Restore
10.5VDC
Communication
RS-485
Isolated Module Network
Inputs
Operating Voltage
10V to 250V (DC/AC RMS) 35-75Hz
Input Type
16 Galvanic Isolated (10ms to 1hr Input Speed Programmable)
Input Current Draw
Current 3mA per input @ 220VDC
Outputs
Outputs
4 (50mA Max) Open Collector
Dimensions
Dimensions (L x W x H)
156.8 x 90 x 60mm (6.17 x 3.54 x 2.36")
Net Weight
289g (10.2oz)
Gross Weight
390g (13.8oz)
Operating Conditions
Operating Temperature
-10° to 55°C (14° to 131°F)
Storage Temperature
-10˚ to 85˚C (14˚ to 185˚F)
Humidity
0%-93% non-condensing, indoor use only (relative humidity)
Mean Time Between Failures
(MTBF)
784,316 hours (calculated using RFD 2000 (UTE C 80-810) Standard)
It is important that the unit is installed in a dry cool location that is not affected by humidity. Do not locate the unit
in air conditioning or a boiler room that can exceed the temperature or humidity specifications.
Integrated Control Technology continually strives to increase the performance of its products. As a result these
specifications may change without notice. We recommend consulting our website (www.ict.co) for the latest
documentation and product information.
PRT-ISO16-DIN | Protege DIN Rail 16 Input Opto-Isolated Expander | Installation Manual
18