Replace 'xxx' with the appropriate address of the module that you are programming.
Example Open Collector Output Connection (LED):
Warning:
Outputs 3 to 8 can switch to a maximum capacity of 50mA each. Exceeding this amount will damage
the output.
Beeper Outputs (5 and 8)
The beeper outputs 5 and 8 on the reader expander provide diagnostic information to the end user and installer
when a card is presented and access is denied or the unit is operating offline. The following table shows the beeper
modes of operation.
Function
Description
2 Beeps
Access Granted
The lock will activate and allow access to the door at which the card has been presented.
1 Long
Beep
Access Denied
The card or PIN is not recognized, or the user does not have access to this door.
4 Beeps
Offline Access Granted
If the module is operating offline from the controller, the reader generates additional beeps
whenever it grants access to a user.
PRT-HRDM-DIN | Protege Half DIN Rail 2 Door Reader Expander | Installation Manual
22
