10
ELT-KLED
Protege EliteSuite Icon LED Keypad
| November 2013
Trouble Conditions
The EliteSuite Security System continually monitors five system trouble conditions that can occur on your
system.
When a trouble condition occurs, the keypad can be programmed to generate an audible tone every 120
seconds. The trouble tone is canceled when the trouble condition is viewed or the condition is returned to
normal. You can choose to silence the keypad completely by disabling the audio output (see page 14).
Viewing System Trouble Information
From the Setup Menu, press [MENU], [4]
The numbered LED corresponding to the trouble condition(s) present will be lit, and can be identified by the
numbered item in the TROUBLE LIST.
Trouble List
The troubles that can occur in your system are:
TROUBLE 8 - Host Comms
Communication with the host system is currently offline. This is possibly due to maintenance or a system fault.
Contact the property manager or security installation company if the problem persists.
TROUBLE 7 - Zone Fault
A zone in the system is faulty or the wiring has been damaged. Contact the property manager or security
installation company to arrange for your system to be serviced.
TROUBLE 6 - Cover Tamper
The cover of the EliteSuite system is open and may have been damaged. Contact the property manager or
security installation company to arrange for your system to be serviced.
TROUBLE 4 - Fire Loop
The fire detection wiring or a fire detector has become faulty. Contact the property manager or security
installation company to arrange for your system to be serviced.
i
Fire Zones and Fire Loop trouble detection must be enabled by your property manager or installation
company.
