- 10 -
Machine number
Pulse Setting
Machine 0
Machine 1
Machine 2
Machine 3
Machine 4
Machine 5
Machine 6
Machine 7
SW4
SW5
SW6
1
2
4
5
10
20
50
100
SW1
ON
ON
OFF
OFF
ON
ON
OFF
OFF
ON
ON
OFF
OFF
OFF
ON
SW2
SW3
ON
ON
ON
ON
ON
ON
ON
ON
OFF
OFF
ON
ON
OFF
OFF
ON
ON
ON
ON
OFF
OFF
ON
ON
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
ON
ND-500G function setting
2
. Front LED Status
(1) Green : Normal
(2) Red : Error
(no notes or 2 notes together)
(3) Orange : Needs to refill notes
(4) Off : Dispensing note
3. Front Button
Reset Key : Press this button to restart the note dispenser. No need
to turn the power off and on again.
1. Dipswitch Setting
ND - 500G
N
D
-
5
0
0
G
Note Thickness Calibration Mode Setting
Credit Active
Credit Width
Dispense Mode
Normal Lo
50 ms
Calibration Mode
Normal Hi
1 sec
SW7
SW9
SW10
OFF
OFF
OFF
ON
ON
ON
Note Dispense Mode
Hopper Mode
Pulse Mode
SW8
OFF
ON
- 11 -
4. Note Dispensing Mode
(1) Pulse Mode : When the Note Dispenser receives enough pulses
( set by Dipsw 4~6) it will dispense one note.
(2) Hopper Mode : The Note Dispenser will begin to dispense notes
when it receives the dispense command, and will
not stop dispensing until it receives the stop
command.
(3) RS-232 Mode : It receives commands from RS-232 signal to
dispense notes.
(Max. 8 note dispensers can be linked together)
Optional : Use cable 3TP-AA221-B4 to connect directly
to PC (page 16).
(1) Under pulse mode, Dipsw 1~3 are not used
(2) Under Hopper mode, Dipsw 1~6 are not used
(3) Under RS-232 mode, Dipsw 4~6 are not used
5. Trouble Shooting
(1) If the front LED is orange, it means the quantity of notes in the
Dispenser is not enough; you can solve this problem by filling more
bills.
(2) If the front LED is red, it means:
A. Out of Notes : Refill the notes in and press the reset button.
B. Dispensing Error : This happens when an error has occurred
during dispensing process, it can be either the
dispending speed is too slow or it's dispensing
2 bills at the same time. Just check if there's
any note jammed in the dispenser, and then
press the reset button.
C. When the front LED is OFF, means the note is jammed in the
Note Dispensing gate, and has blocked the sensor. In this case
just remove the jammed note and it will continue working normally.
PS.
ND - 500G
N
D
-
5
0
0
G