WARNING
THE
POWER
OF
RELIABILITY
ICT INDUSTRIAL SERIES
SETUP
ICT Industrial Power Series converters are
non-isolated DC to DC converters designed for use on
negative ground systems. Each converter is designed
for high efficiency and long service life. The rugged
case and modular design have proven durable in harsh
environments. Extra silicone is used for vibration and
moisture resistance. Standard features include current
limiting, overvoltage protection, fuse protection, high
surge capacity, easy access mounting holes, and a
terminal block connector.
These instructions should be read before using the
product and saved for future reference.
Mount converter securely.
Do not apply power until unit is completely wired.
For best results, wire converter directly to battery
using heavy gauge wire with in line fuse.
NOTE: Do not wire output directly to a power
source. Paralleling outputs are not recommended.
Please contact technical support for application
assistance.
4
4
4
4
Check fuse inside unit, if blown, replace with same
type and rating fuse.
Check for proper voltage at input while converter
is under load.
Check for erratic voltage conditions at input, which
might cause overvoltage circuit to trigger.
TROUBLESHOOTING
4
4
4
CONNECTIONS
4
4
4
Do not place unit on or near sources of
heat/moisture.
Incorrect wiring may result in serious damage to
both the converter and connected equipment.
Unit should be returned to ICT for service.
LIMITED WARRANTY
INNOVATIVE CIRCUIT TECHNOLOGY LTD.
26921 GLOUCESTER WAY LANGLEY, BRITISH COLUMBIA, CANADA V4W 3Y3
T
604.856.6303
F
604.856.6365
www.ict-power.com
ICT Limited Warranty is only intended for the benefit of the original
Purchaser of this product. This Warranty is not transferable or
assignable without the prior written permission of ICT. ICT’s sole
obligation and liability under this warranty is limited to either repairing
or replacing defective products at the sole discretion of ICT. When
repairing or replacing the products, ICT may use products or parts
that are new, equivalent to new or re-conditioned. Parts repaired or
replaced during the warranty period will be under warranty for the
remainder of the warranty period.
The warranty period on ICT products purchased new from ICT is two
years. The warranty period for a repaired product or part thereof is
ninety (90) days or the remainder of the unexpired term of the new
product warranty period, whichever is greater. Repair or replacement
of a defective product or part does not extend the original warranty
coverage period.
No claim will be accepted unless written notice of the claim is
received by ICT in accordance with ICT’s Return Material
Authorization (RMA) procedure, as soon as reasonably possible
after the defect is discovered. A valid product serial number must be
provided with the RMA claim to prove eligibility. The RMA form is
available
on
the
ICT
website
at
www.ict-power.com/support/warranty-repair/.
The Purchaser shall at their own risk and cost return the defective
product to ICT’s factory or designated repair center once an RMA is
issued by ICT. Return of the products to the customer after repair is
completed shall be prepaid by ICT unless otherwise mutually agreed
between the parties. Products shipped to ICT which have incurred
freight damage will not be covered by this Warranty and any repairs
or replacement parts, components or products needed will be
invoiced in the full current price amount and returned freight collect
to Purchaser. It is the Purchaser’s responsibility to check the product
upon receipt for any damage during shipping and to contact the
carrier or shipper regarding such damage. Product that is returned
as defective, which is determined to operate within published
specifications will be returned to the Purchaser freight collect.
This Warranty will be void if the product has been subjected to
misuse, neglect, accident, exposure to environmental conditions not
conforming to the products’ limits of operation, improper installation
or maintenance, improper use of an electrical source, defects
caused by sharp items or by impact pressure, a force majeure event,
has been modified or repaired by anyone other than ICT or its
authorized representative, has been subjected to unreasonable
physical, thermal or electrical stress, improper maintenance, or
causes external to the unit including but not limited to general
environmental conditions such as rust, corrosive atmospheres,
sustained temperatures outside the specified operating range of the
equipment, exposure to power surges and/or electrical surges,
improper grounding, mould or dust, animal or insect damage, water
damage or immersion in liquid of any kind.
ICT does not control the installation and use of any ICT product.
Accordingly, it is understood this does not constitute a warranty of
performance or a warranty of fitness for a particular purpose.
