used.
Connect the two form-C relay bus alarm outputs to an external
monitoring system if needed, by stripping and terminating 16-
28AWG alarm wiring in the Bus A and B Alarm 3-pin connector
plugs, and installing in the back panel. Each Bus Alarm output
will trigger for any fuse or breaker open on that bus. Note that
unused output channels should have a fuse or breaker installed
to avoid continuous activation of the alarm contact.
Bus Alarm Connector: (Bus A or B)
OPERATION
Ensure the correct fuses or circuit breakers are installed in each
channel location that will be used to power a load, and switch
the front panel channel breakers into the ON position (if
equipped). Close the main Bus A and B input disconnect
devices, and the panel is ready to use.
An over current condition on any output channel will trip the
beaker or open the fuse on that channel, lighting the fuse fail
LED (on fuse units) and triggering the Bus Form-C alarm contact
for the affected bus.
SPECIFICATIONS
Operating Voltage (either bus): 10VDC to 60VDC, or -10VDC to
-60VDC
Bus Current Rating:
100A max, 80A cont. (Bus A, B)
Output Current Rating:
20A Continuous per output
(limited by bus max rating)
Fuse/Breaker Capacity:
25A x 6 per bus
Power Consumption:
< 4 W
Alarm Form-C Contacts:
1 output per bus, 0.5A 65VDC
Input Connector:
4x Insulated M8 Stud, with
slip-on insulating boot
Output Connector:
12 position cage clamp type
per bus (10 – 22AWG)
Alarm Connectors:
Removable plug cage clamp
type (16 – 28 AWG)
Operating Temperature:
-20°C to +60°C (Derate max
bus current by 2% per degree
C above 50°C)
Weight:
7 lbs (3.2kg)
Warranty:
2 years
Dimensions:
19.0” x 9.29” x 1.75”
483mm x 236mm x 45mm
LIMITED WARRANTY
ICT Ltd. warrants to the original consumer purchaser that this
product shall be in good working order, free from defects in
materials and workmanship, for a period of two (2) years from
the date of purchase. Should failure occur during the above
stated time period, then ICT will, at its option, repair or replace
this product at no additional charge except as set forth below.
All parts, whether for repair or replacement, will be furnished
on an exchange basis. All exchange pieces become the property
of ICT. This limited warranty shall not apply if the ICT product
has been damaged by unreasonable use, accident, negligence,
disaster, service, or modification by anyone other than the ICT
factory.
Limited warranty service is obtained by delivering the product
during the above stated two (2) years warranty period to an
authorized ICT dealer or ICT factory and providing proof of
purchase date. If this product is delivered by mail, you will
insure the product or assume risk of loss or damage in transit,
and prepay shipping charges to the factory.
Every reasonable effort has been made to ensure that ICT
product manuals and promotional materials accurately describe
ICT product specifications and capabilities at the time of
publication. However, because of ongoing improvements and
updating of ICT products, ICT cannot guarantee the accuracy of
printed materials after the date of publication and disclaims
liability for changes, errors or omissions.
If this ICT product is not in good working order, as outlined in
the above warranty, your sole remedy shall be repair or
replacement as provided above. In no event will ICT be liable for
any damages resulting from the use of or the inability to use the
ICT product, even if an ICT employee or an authorized ICT
dealer has been advised of the possibility of such damages, or
for any claim by any other party.
ICT reserves the right to make changes without further notice to
any products or documentation for improvement of reliability,
function, or design.
ICT Ltd. does not recommend use of its products in life support
applications wherein a failure or malfunction of the product
may directly or indirectly threaten life or cause injury. The user
of ICT products, which are to be used in life support applications
as described above, assumes all risks of such use and
indemnifies ICT against all damages.
INNOVATIVE CIRCUIT TECHNOLOGY LTD.
26921 Gloucester Way
Langley, British Columbia, Canada V4W 3Y3
T
604.856.6303
F
604.856.6365
Alarm Pin
Function
C
Alarm Output common (0.5A 65Vdc max)
NC
Alarm Output normally closed for alarm
NO
Alarm Output normally open for alarm
Innovative Circuit
Technology Ltd.
Standard Dual Bus
Distribution Panel Series
INSTRUCTION MANUAL
855-314-010 (Rev 1.5)
Models:
ICT200DF-12
ICT200DB-12