Innovative Circuit Technology Ltd.
15
NOTE
:
Saving any changes to the network settings will cause the inverter to re-boot,
cycling power to the output.
Network:
MAC Address:
Displays the MAC address assigned to the inverter.
Enable DHCP
: Turn on this setting if your network uses a DHCP server to
automatically assign IP addresses. (Enabled as default setting). To manually
assign a static IP address to the unit uncheck this box, then set the following
parameters.
IP Address
: Specify a unique IP address for the unit.
Subnet Mask:
Specify the mask for the subnet the inverter is located on
Gateway:
Specify the IP address of the default router (Gateway) used for
connecting attached devices to different networks.
Primary DNS
: Specify the IP address of the Primary DNS Server for your
network.
Secondary DNS
: Specify the IP address of the Secondary DNS Server for your
network.
Web Server:
CAUTION
:
Changing the web server port numbers may cause loss of communication with
the inverter.
The following ports may be changed within a range of 1 to 65565, if
required.
HTTP Port
: This port is used for HTTP traffic between the inverter and your
browser. The default HTTP port is
80
, and if you change this the new HTTP
Port number must be appended to the URL used to access the inverter. (e.g.
use URL
http://192.168.0.180:8000
for IP address
192.168.0.180
, port
8000)
HTTPS Port
: The HTTPS (HTTP Secure) protocol uses encrypted data transfer
between web browsers and servers for higher security. The default HTTPS
port is
443
. Append any changed HTTPS port to the end of the URL for the
unit.
