ICT EliteSuite ELT-KLES, User Manual

Page: 16 / 28

16
ELT-KLES EliteSuite Eclipse LED Keypad User Manual | February 2014
Arming/Disarming
To take full advantage of your system, you should familiarize yourself with the different arming methods.
Entry Delay
To avoid the alarm triggering immediately once a zone is disturbed, it is possible to have some zones set with an
Entry Delay . An entry point, such as the front foyer, will be programmed with an entry delay time. When an entry
point is opened, the keypad will emit a continuous audible tone until you disarm the system. Your EliteSuite
system will not generate an alarm until this timer elapses.
The zones that have an entry delay are configured by your property manager or security company.
Exit Delay
After entering a valid arming sequence, the exit delay time will provide you with enough time to exit the
protected area before the system arms. The keypad will generate a beep-beep tone repeatedly during the exit
delay period. The tone will increase in frequency to indicate that only ten seconds remains.
Disarming
To disarm an armed system or an alarm, enter your user code. An entry point, like the front door, will be
programmed with an entry delay time. When an entry point is opened, the keypad will emit a continuous audible
tone until you disarm the system. The system will not generate an alarm until this timer elapses. All user codes
can be used to disarm the system.
Deactivating Alarm
To deactivate an alarm, enter your [USER CODE]. This will also disarm the system if it was armed.
Disarming Your System
1. Enter through a designated entry point (Entry Door), the entry delay time will start and the keypad will emit a
continuous audible tone.
2. Enter your [USER CODE].
Regular Arming
Regular arming arms your system.
Arming Your System
1. Check that the system is ready to arm and all zones are closed (the Ready indicator is green).
2. Enter your [USER CODE].
3. The exit delay will start and you can now leave your premises.
Quick arming can be used by pressing and holding the ARM key. This option must be enabled by your property
manager or installation company.