background image

 

ELT-KLCS 

EliteSuite Touch Sense LCD Keypad 

User Manual | May 2017 

11

 

 

User Options 

 

i

 

The User Options menu contains options for arming, disarming and door latching for the optional Card 
Reader interface. If your system is not equipped with a Card Reader, changes to these options will 
have no effect. 

 

From the User Setup Menu, press or use the [UP] and [DOWN] keys to scroll to the Options menu and press the 
[ENTER] key. 

 

Modifying User Options 

Use the [UP] and [DOWN] keys to scroll through the available options. Press the [1] key to turn the option ON, 
or the [2] key to turn the option OFF while viewing that option. Once the options have been set press the 
[ENTER] key to return to the User Menu. The available options are described below. 

Option 1 – Arm Only Code 

Code Can Arm  
System Only: N 

 

Enabled allows the user code to be used only for arming the system. 

 

Disabled allows the user code to arm and disarm the system. 

Option 2 – Master User 

User Can Modify  
Other Users: N 

 

Enabled allows the selected user to access the User Setup menu and modify codes, card numbers and 
options of all other users. 

 

Disabled prevents access to the User Setup menu. 

Option 3 – Single Badge Disarming 

For Card Reader Interface Equipped Systems Only 

Disarm On Single  
Badge Enabled: N 

 

Enabled allows the selected user to disarm the system by presenting the card programmed for that user at 
the Card Reader. 

 

Disabled will allow only unlocking of the door where the card is presented, and the system will remain 
armed until disarmed by PIN entry on the keypad or a card being presented by a Single Badge Disarm 
enabled user. 

 

i

 

Each user may have only one of the following Triple Badge options enabled at any time. Enabling one 
of the triple badge user options automatically disables all other Triple Badge user options. 

 

Option 4 – Triple Badge Arming 

For Card Reader Interface Equipped Systems Only 

Arm on 3  
Badge Enabled: N 

 

Enabled allows the selected user to regular arm the system by presenting the card programmed for that 
user at the Card Reader three times in quick succession. 

 

Disabled prevents triple card presenting from arming the system. 

Summary of Contents for EliteSuite ELT-KLCS

























Reviews: