-3-
2. Installation
2-1. Device Mounting Instruction
Attention!! Prior installation, please remove the coin changer from
the carton and inspect for damages.
Attention!! Turn off VMC Power during installation-IMPORTANT!!!
Warning!! Do not plug both MDB and Executive connector to VMC
board simultaneously!! It may cause damage of VMC board.
1. Press the green hook at the left side
of the coin changer and tilt the upper
module.
2. Unplug flat cable to separate upper
module from device.
3. Loosen the 3 mounting screws 2 or 3
turns.(do not unscrew these completely)
Lift the coin changer to mount inside
the vending machine.
4. Tighten the screws and place the upper
module back to the device.
5. Plug flat cable back to upper module
then close the upper module till it firmly
fixed by green hook.
Plug device power and communication
cable to vending machine.
Flat cable
CC6100
