21
WIKA operating instructions pressure transmitter, model P-3x
11473500.07 01/2020 EN/DE/FR/ES
EN
6. Commissioning, operation/7. Maintenance and cleaning
6.6 Commissioning of CANopen instruments
■
Connect the CAN interface (e.g. PEAK PCAN-USB) to the PC and the pressure sensor.
■
Start the CAN software (e.g. PEAK PCAN-View).
■
Make sure that the correct bit rate and node ID of the pressure sensor is used.
For further information see "Quick Start Guide" under "Additional Instructions".
7. Maintenance and cleaning
7.1 Maintenance
This instrument is maintenance-free.
Repairs must only be carried out by the manufacturer.
7.2 Cleaning
CAUTION!
■
Before cleaning, correctly disconnect the instrument from the pressure supply, switch it
off and disconnect it from the mains.
■
Clean the instrument with a moist cloth.
■
Residual media in dismounted instruments can result in a risk to persons, the
environment and equipment. Take sufficient precautionary measures.
■
Do not use any pointed or hard objects for cleaning, since the diaphragm of the process
connection must not be damaged.
For information on returning the instrument see chapter 9.2 "Return".
Summary of Contents for P-3 Series
Page 91: ...91 11473500 07 01 2020 EN DE FR ES ES ...
Page 92: ......