Page 2
Cable Connection
On the BNC side of the LANTAP,
make sure that the COAX, T, and
Terminator are connected as shown:
The LANTAP Adapter is a very simple and easy to use so-
lution for connecting a standard 10/100/1000BaseT Ether-
net bus to the Primus EPIC LAN.
On the opposite end, plug one end of the USB cable into the port
marked USB on the LANTAP, and the other end into your computer.
Please note, that ICS strongly recommends using a USB 3.0 port. These
are usually blue instead of black or grey and provide up to 1 amp of
current.
Please make sure that your com-
puter is powered on and running.
Diagnostic LED,10/100/1000 Link.
Light Green / Flashing Green with
10/100/1000BaseT activity. RED
on collisions between 10/100/1000
and 10Base2
Diagnostic LEDs, 10Base2
Activity Yellow Flashing on
Activity
