Operation
IVA 521
EN V1.20
Page
23
o
39
10.3.2.2 Modbus TCP (Optional)
The Flow sensors
IVA 521
comes optional with a Modbus TCP Interface
(HW Interface: M12 x 1 X-coded connector).
Device supports with this option the Modbus TCP protocol for communication with SCADA systems.
TCP port is set to 502 by default. Port can be changed at the sensor or using PC Service Software
Modbus device address (Unit Identifier) can be set in the range of 1- 255.
Specification and description of the Modbus protocol is free to download on:
Supported Modbus commands (functions):
Command
Code
Description
Function Code
3
(Read holding register)
Function code
16
(Write multiple registers)
For more details, please see
IVA 5xx
Modbus RTU_TCP Installation
V1.04
Settings
Network Setup
10.3.2.2.1 Network Setup DHCP
Settings
Network Setup Settings
IP Address
Here you can set up and made a connection, with
or without
DHCP
, to a computer.
Remark:
With activated
DHCP
the automatic integration of
the sensor in an existing network is possible,
without a manual configuration.
Storing of settings by pressing
“Save
“
Summary of Contents for IVA 521
Page 38: ...Notes IVA 521 English V1 20 Page 38 of 39...
Page 39: ......