Working range of humidity and temperature
Connection diagram
RS232
and
RS485
I
LW(K)KR... with data line AWKR.02.00-xx.x
I
LW(K)KM...
recommended working range
% r.h.
100%
80%
60%
40%
20%
0%
-40°C
0°C
40°C
80°C
Temperature accuracy of the sensors
ZE36
as designation
F5.2
adapter required for sensor tubes Ø 12mm
for humidity standard ZE 31/1 and wall console 20.009
ZE 31/1-12
ZE 31/1-33
ZE 31/1-75
ZE 31/1-84
ZE 31/1-97
as designation
F5.2
humidity standard to check the accuracy of the sensors 12 %rh at 25°C
humidity standard to check the accuracy of the sensors 33 %rh at 25°C
humidity standard to check the accuracy of the sensors 75 %rh at 25°C
humidity standard to check the accuracy of the sensors 84 %rh at 25°C
humidity standard to check the accuracy of the sensors 97 %rh at 25°C
ZE33
as designation
F5.2
adapter for humidity standard ZE 31/1
Flange
20.045
fixing flange for sensor tubes Ø 12mm with rubber sealing
5
9
6
1
RD
BN
YE
BK
Shield
+U
B
GND
A / TX
B / RX
+U
B
GND
TX
RX
Accessories
Designation Order reference Info sheet Description
Sub-D
data line
RS232
AWKR.02-00-xx.x
-
Sub-D data line up to max. 15 m for direct connection to serial PC interface;
(e.g. 15m: AWKR.02-00-15.0)
Note: jack of data line IP30 / -10...50°C !
USB adapter
RS232->USB
USB adapter
-
USB adapter for Sub-D-data line
To connect up the Sub-D-data line to a USB interface on the PC or Laptop
Setup cable
UART -> USB
BKKM.02.AK-01.8
-
Connecting cable sensor --> PC, suitable for all sensors of the L Series digital,
to configurate / change the Modbus parameters
