Product Specifications 1-7
In
tr
od
u
ct
ion
Product Specifications
t
Main processor: Intel Celeron 333/366/400/433/466/500/533MHz processor or
Intel Pentium III FC-370 500/550/700/800/850MHz processor.
t
CPU Front Side Bus Clock: 66/100MHz
t
CPU Core/Bus Clock Ratio: x2 to x8
t
BIOS: AMI system BIOS with 4Mbit Firmware Hub to support DMI, PnP, APM,
and ACPI
t
Main Memory: Two 168-pin DIMM sockets, supporting 3.3V SDRAM up to
512MB (system will run ECC but will not utilize the ECC advantage; the system
will not POST if a registered (buffered) DIMM is installed )
t
Chipset: Intel 810e Chipset
t
Bus Interface: Follows PICMG standard (32-bit PCI and 16-bit ISA ), fully
complies with PCI bus specification V2.1
t
PCI IDE Interface: Supports two enhanced IDE ports up to four HDD devices with
PIO mode 4 and Ultra DMA/33, Ultra DMA/66 mode transfer
t
Floppy Drive Interface: Supports up to two floppy disk drives, capacities of 360K
to 2.88MB
t
Serial Ports: two high speed 16C550 compatible UARTs with 16-byte
T/R FIFOs
t
IR Interface: one 6-pin header for serial standard infrared wireless communication
t
Parallel Port: Supports SPP, Bi-direction, EPP/ECP mode
t
USB Interface: two USB (Universal Serial Bus) ports for high speed I/O
peripheral devices
t
PS/2 Mouse and Keyboard Interface: two 6-pin Mini-DIN connectors and one
5-pin shrouded connector for PS/2 mouse, keyboard, and backplane connections
(on Legacy backplanes only)