BIOS POST Check Point List 4-41
BI
O
S Se
tu
p
91
The floppy drive controller has been configured. Configuring the hard
disk drive controller.
95
Initializing the bus option ROMs from C800.
96
Initializing before passing control to the adaptor ROM at C800.
97
Initialization before the C800 adaptor ROM gains control has been
completed. The adaptor ROM check is next.
98
The adaptor ROM had control and has now returned control to BIOS
POST. Performing any required processing after the option ROM
regained control.
99
Any initialization required after the option ROM test has completed.
Configuring the timer data area and printer base address.
9A
Return from setting the timer and printer base address. Setting the RS-232
base address.
9B
Returned from setting the RS-232 base address. Performing any required
initialization before the coprocessor test.
9C
Required initialization before the coprocessor test is over. Initializing the
coprocessor.
9D
Coprocessor initialized. Performing initialization after coprocessor is
tested.
9E
Initialization after the coprocessor test is complete. Checking the
extended keyboard, keyboard ID, and Num Lock key. Issuing the
keyboard ID command.
A2
Displaying any soft errors.
A3
Soft error display complete. Going to set keyboard typematic rate.
A4
Keyboard typematic rate set. Programming memory wait states.
Table 4-12.Uncompressed Initialization Codes
(Continued)
Code
Description