Auto Sentry® Petro - Installation Guide
24
Molded Plastic Installation
Figure 18. Roto Mold #5 for the Auto Sentry® Petro (Back Piece)
DO NOT OVER TIGHTEN for steps #20 and #21. Five pound-foot torque is
recommended. Over torquing could cause shearing or cracking.
21.
Install and tighten (4) #8-11 X 1-1/4” (Bag D & I) across the top of the backside of Roto Mold #5.
22.
Install and tighten (8) #10-32 x 1/2” (Bag F) (no washers) in the pedestal of the
Roto Mold #5. See Figure 18.
You have now finished installing the roto plastic molding on the Auto Sentry® Petro.