ICS Advent DUAL232/AT Series, Product Manual

Page: 16 / 28

Manual Number: 00750-010-3 Page 9
Chapter 4: Windows 3.1 Setup
To configure the DUAL232/AT: under Windows 3.1 start by opening the “Control Panel”. The
Control Panel is typically found in the “Main” Program Group. The next step is to open the “Ports”
selection under the Control Panel.
Select the port you wish to configure. Once you have selected the port, click on the “Settings”
button.
The next step is to select the appropriate Baud rate, Data Bits, Parity, Stop Bits and Flow control.
If you wish to select an IRQ or address different than the default click on the “Advanced” button.