Chapter 2: WinBIOS Setup
Manual Number: 41209-003-2
Page 2-7
Green PC Monitor Power State
This option specifies the power management state that the Green PC-compliant video monitor
enters after the specified period of display inactivity has expired. The settings are
Off, Standby
or
Suspend
. The default setting is
Standby
.
Video Power Down Mode
This option specifies the power management state that the video subsystem enters after the
specified period of display inactivity has expired. The settings are
Disabled, Standby,
or
Suspend.
The default settings are
Disabled
.
Hard Disk Power Mode
This option specifies the power management state that the hard drive enters after the specified
period of display inactivity has expired. The settings are
Disabled, Standby
, or
Suspend.
The
default settings are
Disabled
.
Hard Disk Timeout (Minute)
This option specifies the length of a period of hard disk inactivity. When this period expires, the
hard disk drive enters the power-conserving mode specified in the Hard Disk Power Down Mode
option described on the previous page. The settings are
Disabled, 1 Min (minutes),
and all one
minute intervals up to and including
15
Min
. The default settings are
Disabled.
Standby Timeout (Minute)
This option specifies the length of the period of system inactivity when the computer is in Full-
On mode before the computer is placed in the Standby mode. In Standby mode, some power use
is curtailed. The settings are
Disabled, 1Min, 2Min
, and all one minute intervals up to and
including
15 Min
. The default settings are
Disabled
.
Suspend Timeout (Minute)
This option specifies the length of the period of system inactivity when the computer is already
in Standby mode before the computer is placed in Suspend mode. In Suspend mode, nearly all
power use is curtailed. The settings are
Disabled, 1Min, 2Min,
and all one minute intervals up
to and including
15 Min
. The default settings are
Disabled
.
Slow Clock Ratio
This option specifies the speed at which the system clock runs in power saving modes. The
settings are expressed as a ratio between the normal clock speed and the power down clock speed.
The settings are
1:1, 1:2,
(half as fast as normal),
1:4,1:8,1:16,1:32,1:64,
or
1:128.
The default
settings are
1:8
.
Summary of Contents for 586MBHP Series
