User Guide
1
Introduction
This manual is intended to assist IT professionals install the USB Ranger
models 110 and 410. The instructions in this guide assume a general
knowledge of computer installation procedures, familiarity with cabling
requirements, and some understanding of USB devices.
NOTE
:
Notes give additional information that could make installation
easier.
USB Ranger Product Contents
When you open your USB Ranger for the first time you should find the
following items:
•
USB Ranger User Guide
•
Local EXtender (LEX)
•
Remote EXtender (REX)
•
AC power adapter (optional)
•
USB cable (2m long)
To complete the installation, you will also require the following items that
are not included with the product:
•
USB compatible computer
•
USB device
•
Category 5 Unshielded Twisted Pair (UTP) cable with two RJ45
connectors (if using surface cabling),
OR,
Category 5 UTP cabling with two information outlets and two
Category 5 UTP patch cords with RJ45 connectors (if using
premise cabling)
NOTE
: The maximum length of the Category 5 UTP cable, including patch
cords, must not exceed 100m.
