ICRealtime PTZN23X4D User Manual Download Page 20

Page: 20 / 28

IDLE FUNC

：

OFF

IDLE TIME

：

10MIN

IDLE ACTION

：

NONE

PARAMETER

：

NONE

BACK EXIT

PRIVACY MASK

PTZ SPEED

HORIZONTAL COORDINATES

POWER UP

MENU IDLE : 1M

PTZ AUTO STOP : 15S

BACK EXIT

When there is no available command for specified time, dome automatically goes on the previous set
functions.

IDLE

FUNCTION

：

There are two modes ON/OFF. Please use left/right key to set.

IDLE TIME: System idle period. Please use the left/right button on the keyboard or in the speed

dome terminal menu to set.

IDLE ACTION

：

There are several functions you can select:

NONE/PRESET/SCAN/TOURING/PATTERN. Please use the left/right button on the keyboard or in
the speed dome terminal menu to set.

PARAMETER: It is to set idle motion SN. System can implement the corresponding action when it is

idle for the specified period. Click the left/right button to set.

SAVE

：

Move the cursor to SAVE and click confirm button to save current setup.

BACK: Go back to previous menu.

EXIT: Log out system menu.

2.4.4.7 Next Page

Move the cursor to the NEXT PAGE and then click the confirm button, you can go to the third menu
to set the PTZ SPEED, POWER UP and etc.

PRIVACY MASK: Here you can set the privacy mask number and etc. It includes the third menu.

Please move the cursor to the current item and then click the confirm button to go to the next
interface.

PTZ SPEED: It is to set PTZ speed. Please use the left/right button to set.

HORIZONTAL COORDINATES: Please move the PTZ to the horizontal coordinates, click OK

button to confirm.

POWER UP: It is to set the PTZ action when the speed dome boots up. Click the confirm button to

go to the next interface to set.

MENU IDLE: If current setup is ON, once you open the menu and leave it idle for specified period,

the menu may automatically disappear. If current setup is OFF, the menu is always there and will
not disappear. Please use the left/right button to set.

PTZ AUTO STOP: The speed dome will stop all the PTZ operations when there is no command for

the specified time. It includes various setups. Please use the left/right button to set.

TEMPERATURE: It includes: on/off/auto (default).

Summary of Contents for PTZN23X4D





























Search results

Summary of Contents for PTZN23X4D

Reviews:

Brands by name

Popular brands

ICRealtime PTZN23X4D, User Manual

Search results

Summary of Contents for PTZN23X4D

Reviews:

Brands by name

Popular brands