25
Figure 2-18
2.6.3 Priority
Please note the activation snapshot has the higher pr iority than schedule snapshot. If you
have enabled these two types at the same time, system can activate the activation snapshot
when alar m occurs, and other wise system just operates the schedule snapshot.
2.6.4 Image FTP
In Networ k inter face, you can set FTP server infor mation. Please enable FTP function and
then click save button. See Figure 2-19.
Please boot up corresponding FTP ser ver.
Please enable schedule snapshot (Chapter 2.5) or activation snapshot ( Chapter 2.6.2) first,
now system can upload the image file to the FTP server.
Figure 2-19
2.7
Network
Here is for you to input network information.
IP Version: There are two options: IPv4 (Figure 2-20) and IPv6 (Figure 2-21). Right now, system
supports these two IP address format and you can access via them.
Please input the
corresponding information
here, if you just upload the
image FTP.
