I C R E A L T I M E S E C U R I T Y S O L U T I O N S
10
Web GUI Operation
This section outlines how to assign an IP address to the camera, and how to access and
control the
IPC via it’s built inWeb Ineterface.
3.a Network Connection
Step 1: Ensure the Camera is physically connected to your Network, and Powered ON.
Patch the IP Camera into your network with a standard Ethernet cable. Provide the camera with power either
via PoE or with the separate 12VDC power input jack.
Step 2: Assign an IP address to the IP Camera.
The ICIP360L6 Series camera (and all ICR IP Cameras) have a factory default static IP address of
192.168.1.108. If this matches the same subnet as your LAN, you will be able to login to the camera by typing
this address into your browser (assuming that the IP address does not conflict with another device on your
network).
Alternatively, you can use our IP Auto Search utility to rapidly find and change IP addresses for IC Realtime
series IP Cameras. The utility is available on our support page at :
http://www.icrealtime.com/docs/IPAutoSearch.zip
3.b Logging In, and Main Interface
Step 1: Open up your Web Browser (Safari, Chrome, Firefox, or IE) and input the IP address
of your IP camera.
In Example, open Safari and browse to
http://192.168.1.108
Chapter
3
