8
3
Web Operation
This series IPC product support the Web access and management via PC.
Web includes several modules: monitor channel list, record search, alarm setup, system configuration, PTZ
control, monitor window and etc.
IP camera factory default setup:
z
IP
address:
192.168.1.108.
z
User name: admin
z
Password:
admin
3.1
Network Connection
Please follow the steps listed below for network connection.
z
Make sure the IPC has connected to the network properly.
z
IPC IP address and PC IP address shall be in the same network segment. IPC default IP address is
192.168.1.108. If there is router, please set the corresponding gateway and subnet mask.
z
Use order ping ***.***.***.***(* IP camera address) to check connection is OK or not.
3.2
Login and Logout
Open IE and input IP camera address in the address bar.
For example, if your camera IP is 192.168.1.108, then please input http:// 192.168.1.108 in IE address bar.
See Figure 3-1.
Figure 3-1
System pops up warning information to ask you whether install control webrec.cab
or not. Please click OK
button, system can automatically install the control. When system is upgrading, it can overwrite the previous
Web too.
If you can’t download the ActiveX file, please check whether you have installed the plug-in to disable the
control download. Or you can lower the IE security level. See Figure 3-2.
Input your IP
address here
